-40%

1967 1968 1969 Camaro / Firebird Adjustable Front Drag Shocks

$ 25.84

Availability: 93 in stock
  • Condition: Used
  • Placement on Vehicle: Front
  • Warranty: No Warranty
  • Modified Item: No
  • Returns Accepted: ReturnsNotAccepted
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: C2600

    Description

    Here we have a pair of Competition Engineering # C2600 3 way adjustable front drag shocks for a 67-69 Camaro/ Firebird. These will also fit many other year GM cars. Just turn dial to make adjustable to 90/10, 80/20, or 60/40 ratios.
    Folks these shocks are in very nice mechanical condition, just not the
    prettiest
    ones at the ball. They are all scuffed and scratched from laying around my garage for years but work as they were intended.
    According to the Competition Engineering website these will also fit the following vehicles:
    Detailed Description
    Competition Engineering Adjustable Front Drag Shocks
    Competition Engineering's 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile. The principle behind their shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Their rear shocks work in conjunction with their front shocks making the transition from initial launch to top end charge as smooth as possible.
    The front drag shocks are adjustable in three ratios: 90/10, 80/20, and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber, with the first number being extension and the second number compression. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It's as simple as twist and click.
    Note:
    These shocks are designed for Drag Race use only! Not for street use.
    Designed for these applications (front):
    Chrysler/Dodge Dakota, 1987-92
    Dodge Truck, Ram 50, 1979-92
    Buick Apollo, 1974-80
    Buick Apollo without H.D. Suspension, 1973
    Buick Apollo with H.D. Suspension, 1973, 1968-72
    Buick Century, 1973-81
    Buick Regal, 1973-87
    Buick Riviera, 1971-78
    Buick Skyhawk, 1975-80
    Buick Skylark, Special, 1968-79
    Chevrolet Blazer 2WD, S-10 Pickup, 1982-96
    Chevrolet Caballero, El Camino, 1968-87
    Chevrolet Camaro, 1967-69
    Chevrolet Chevelle, Malibu, 1968-1983
    Chevy II, Nova, 1974-79
    Chevy II, Nova without H.D. Suspension, 1973
    Chevy II, Nova with H.D. Supsension, 1973
    Chevy II, Nova with Monoleaf Rear Springs, 1968-72
    Chevy II, Nova with Multileaf Rear Springs, 1968-72
    Chevrolet Monte Carlo, 1970-88
    Chevrolet Monza, 1975-80
    Chevrolet Vega, 1972-77
    Oldsmobile Cutlass, F85, 1968-88
    Oldsmobile Cutlass, F85 without H.D. Suspension, 1964-67
    Oldsmobile Cutlass, F85 with H.D. Suspension, 1964-67
    Oldsmobile Omega, 1973-79
    Oldsmobile Starfire, 1975-80
    Pontiac Astre, 1975-77
    Pontiac Bonneville, 1982-86
    Pontiac Firebird, 1967-69
    Pontiac Grand Am, 1968-81
    Pontiac Grand Prix, 1969-87
    Pontiac GTO, 1967-73
    Pontiac LeMans, Tempest, 1967-81
    Pontiac Sunbird, 1976-1992
    Pontiac Ventura II, 1971-77
    Toyota Corona Mark II, 1972-1976
    Toyota Corona, 1965-1973