PocketWizard TTL Wireless Radio 4-Pack for Canon

Description

BuzzTronics
VISIT OUR EBAY STORE
PocketWizard TTL Wireless Radio System for Canon Cameras
Brand New in Original Packaging
Features
Combination transmitter/receiver
High speed sync up to 1/8000th sec.
On-camera hot shoe
Triggers flash or camera
32 channels, multi-zone
Triggers all pocket wizards
Standard triggering with most cameras
USB upgradeable
Product Description
The PocketWizard TTL Wireless Radio System for Canon Cameras comes equipped with everything you'll need for successful lighting and remote triggering during your photographic endeavors. The kit includes 2 x Flex TT5 Transceiver Radio Slave, an AC3 ZoneController, and a G-Wiz Trunk. You can use the FlexTT5 Transceiver to control off-camera electronic or intelligent E-TTL Speedlites. You can now place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight, and in bright sunlight. The FlexTT5 is compatible with any PocketWizard radio for triggering manual flash or remote cameras.
ControlTL
PocketWizard’s newest firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through the proven radio system. ControlTL allows remote TTL for Canon E-TTL II systems as well as Manual Power Control. ControlTL firmware is configurable and upgradeable for future-proof continuous improvement.
Dedicated E-TTL II Triggering
Locking your MiniTTI Transmitter into the hot shoe of a Canon DSLR camera and mounting E-TTL II flashes onto FlexTT5 Transceivers gives you full autoflash exposure control with the freedom and reliability of a PocketWizard radio. There are no special settings to make or modes to call up. Use the camera, on-camera flash or flash commander controls for flash compensation, zone and ratio control.
Power Tracking
When working with the PowerST4, PowerMC2 and AC9/FlexTT5 paired with compatible manual flashes, you can change any of your settings on your camera and the system adjusts for those changes. Change your flash exposure compensation to adjust the exposure or make adjustments in aperture or ISO and the system balances your flash for proper exposure
PocketWizard Utility - Programmable and Upgradeable
Use the supplied PocketWizard Utility software with the on-board USB port to program the FlexTT5 to any PocketWizard channel and zone as well as many other custom settings. The FlexTT5 can be upgraded whenever updates and feature enhancements are available (many planned!).
Channels / Learn Mode
The FlexTT5 has two channel configuration settings; C1 and C2. Each can be programmed as needed with up to 20 ControlTL channels for TTL photography or Manual Power Control, or 32 standard channels for manual flash photography. Channels can be configured with the PocketWizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings.
SpeedCycler with an AC3 ZoneController
Previously only seen with PocketWizard’s MultiMAX radios, this new mode is designed to rapidly cycle through multiple flash units fired individually in sequence. This allows photographers to fire a camera in sync with flashes faster than a single flash unit can recycle. It can also be used for triggering remote cameras sequentially. SpeedCycler is engaged in transmitting FlexTT5 via the PocketWizard Utility. SpeedCycler mode requires an AC3 ZoneController in the top hot-shoe of the on-camera PocketWizard radio. Zones A, B, and C will be triggered sequentially and individual zones can be disabled by setting the AC3’s Zone Switch to the off position. Both TTL and manual flash controls are supported.
Flash Power Control without a Camera
Photographers can now take their AC3 and transmitting radio off-camera and use it to set power levels for any flash with a ControlTL receiver. Now, when connected to a MiniTT1 or FlexTT5, manual power levels are transmitted to remote flashes when the TEST button is pressed even when the transmitter is off the camera. This affects both speedlights connected to receiving FlexTT5s and larger flashes like AlienBees and Elinchrom RX units with ControlTL receivers.
What's in the Box
2 x Flex TT5 Transceiver Radio Slave
AC3 ZoneController
G-Wiz Trunk
Specifications
PocketWizard TTL Wireless Radio System
General
Current firmware: 6.800
TTL compatibility: Canon E-TTL II
Frequency: FCC/IC model: 340.00-354.00 MHz North America, CE model: 433.44-434.42 MHz EU/Asia/Other
Channels: 52 Channels over 26 Frequencies (FCC/IC), 35 Channels over 5 Frequencies (CE)
Antenna: 2.7 inch (6.9 cm) rubberized with 180 degree swing
Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range performance: Up to 10 to 240 meters (30 to 800 feet for E-TTL triggering. Up to 10 to 365 meters (30 to 1200 feet) for basic triggering. Range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference.
Mounting: Hot Shoe, 1/4-20, lanyard, hook-and-loop
Maximum Shooting Rate frames per second (fps) 8 fps for E-TTL II and normal triggering
Power / Channel switch: OFF - C.2 - C.1
Zone select switch: A-B-C (matches Canon slave groups)
Status indicator: LED: Green, Amber, Red status indications
Camera / P1 Port: 1/8 inch (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash / P2 Port: 1/8 inch (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
Minimum Receive Contact Time
Camera / P1 Port = 80 milliseconds
Flash / P2 Port = 500us
Voltage Present
3.3 VDC (all pins) - safe for all cameras
Hot Shoe voltage protection: Hot Shoe: up to 50V
USB: USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
Operating temperature: Above -15° C (5° F) and below 50° C (120° F).
Storage temperature (without battery): Above -30 C (-22 F) and below 85 C (185 F)
Construction
High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
Power and Physical
Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
Battery Life 60 + Hours
Dimensions: 3.6 inch (9.2 cm) long x 2.9 inch (7.3 cm) wide x 1.4 inch (3.6 cm) tall, antenna lowered
Weight: 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
Shipping
Payment
Returns
Feedback
Free Shipping is only to the Continental US.
We currently do not ship to APO/FPO's or Hotels.
PayPal is our only accepted form of payment and Immediate Payment is Required.
Contact Buzztronics to receive a Returned Merchandise Authorization (RMA) number, to ensure proper handling of the return and/or replacement.
Products cannot be returned without an RMA number.
Damaged, defective or incorrect items can be returned within 14 days of receipt.
All items must be returned with original packaging and accessories.
Upon receipt, your return will be processed.
If item is defective, damaged or incorrect a full refund will be provided.
If the item is NOT defective, damaged or incorrect a 15% restocking fee and the cost of return shipping will be deducted from your refund.
If the item is missing original packaging and/or accessories, a 15% restocking fee will be deducted from your refund.
We strive for every transaction to be five stars!
Please let us know how we can make yours a five-star rated one too!
Our goal is to make sure you are customer 100% satisfied with your order. When you receive your order take a minute to leave us positive feedback at eBay. If you are not satisfied with any part of our service we please contact us to allow us correct the problem, prior to leaving your feedback. Please send us a message through eBay and let us know how we can earn your
5 stars!
If you have any questions or comments, please contact us through eBay message.