Xpro-N i-TTL 2.4G X System Flash Trigger for Nikon T8D9

Description

Xpro-N TTL Flash Trigger can not only control the flashes with built-in X system (e.g. camera flashes, outdoor flashes and flashes), but also can control for Nikon flashes when using in combination with X1R-N receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger suits for Nikon series hotshoe-mounted cameras.
Features:
Built-in 2.4G X system & versatile using methods. As a flash trigger(for camera flash, outdoor flash and flash); As a trigger for Nikon speedlites; As a shutter release trigger; As a flash (without X system) trigger with 2.5mm sync cord jack.
16 groups and 32 channels to control and trigger. Add 01 to 99 settings, which can only achieve triggering when the channels and of the master and slave unit are set to the same, avoiding signal interference effectively.
Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, -shoot & multi-shoot setting, group modeling lamp control, group zooming, adjusting all groups' output value simultaneously, etc.
-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation. Only weights 80g for great portability. Support Type-C USB firmware upgrade and triggering by 2.5mm sync cord jack.
trigger is compatible for
series camera models: D5, D4, D60, D70S, D90, , D200; D300S, D300, D500, D610, D700, D750, D800; D810, D3100, D3200, D3300, D5000, D5100, D5200; D5300, D7000, D7100.
Specifications:
Brand:
Model: Xpro-N
Compatible Cameras:
For Nikon series cameras (i-TTL autoflash) Support for the cameras that have PC sync socket.
: 2 * AA (
not included
)
TTL Autoflash: i-TTL
Manual Flash: Yes
Stroboscopic Flash: Yes
High-Speed Sync: Yes
Second-Curtain Sync: Yes
Flash Exposure Compensation: Yes, ±3 stops in 1/3 stop increments
Flash Exposure Lock: Yes
Assist: Yes
Modeling Lamp: Control the modeling lamp by trigger
Beeper: Control the beeper by trigger
Setting: The receiver end can control the camera through the 2.5mm sync cord jack
ZOOM Setting: Adjust the ZOOM value by the
TCM Function: Transform the TTL value into the output value in the M mode
Firmware Upgrade: Upgrade through the Type-C USB port
Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart
Transmission (approx.): 0-100m
Built-in : 2.4G
Modulation Mode: MSK
Channel: 32
ID: 01-99
Group: 16
Display: Large LCD panel, backlighting ON or OFF
Item Size: 9 * 5.8 * 5cm / 3.5 * 2.3 * 2in
Item Weight: 85g / 3oz
Package Size: 12.2 * 12.2 * 6.2cm / 3.5 * 2.4 * 2in
Package Weight: 168g / 5.9oz
Package List: D5085
1 * Xpro-N Flash Trigger
1 * User Manual (English & Chinese)
Note:
Camera, flash and are not included.